Featured Product :: Toyota Tundra Headers & Exhaust Systems


Click to enlarge
JBA Equipped - Off-Road Magazine's
project Toyota Tundra 4.7L V8

Over the years,Toyota trucks and SUV's have grown in size and performance to go head-to-head with the best from Detroit. With the Tundra, Tacoma and Sequoia all equipped with class leading features, it's no wonder they are popular with enthusiasts. But just like Toyota, JBA believes in taking something good and making it better. Specifically, the high-tech V8 and V6 engines in these trucks. The factory exhaust manifolds and exhaust systems are restrictive and inefficient designs that keep the engine from reaching it's potential. Our engineers designed matched performance headers and cat-back systems that open up the exhaust flow with a powerful, but not offensive sound. Low-end torque and high RPM peak power are greatly improved for wide open performance. How does dyno proven gains of 25+ hp and 38 lb.ft. of torque sound? Plus these components feature "bullet-proof" construction and JBA's patented technology for long lasting performance and reliability. Nothing else comes close. Power, sound and quality - JBA has it all.

JBA Cat4ward® Headers :: Tundra and Sequoia 4.7L V8

If you tow or haul with your V8 Toyota, JBA satisfies your need for more horsepower and torque with high performance Cat4ward® headers. With stainless steel mandrel-bent tubing and JBA's patented Firecone® high flow collector - these headers build maximum power and torque without losing valuable low-end performance. Plus the heavy-duty construction for the ultimate in durability - JBA Headers are the perfect upgrade for your V8 Tundra/Sequoia. They are also available with polished silver or titanium finish ceramic coating for the ultimate in high heat thermal protection and lasting good looks under the hood. Each kit includes high quality hardware, gaskets and thorough instructions for the do-it-yourself installation.
Download the 4 Wheel Drive & Sport Utility Magazine installation and dyno article on a 2005 Tundra Click here

 

 

 

2010S
Click to enlarge
01-04 Toyota Tundra 4.7L - p/n 2010S

 

P1

 

*This Product has been granted a California Air Resources Board (CARB) “E.O” (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.


 

:: Header Features ::
  • 50 State Smog Legal (EO# D-57-33)
  • 3/8" thick laser-cut flanges
  • Mandrel-bent stainless steel primary tubes
  • Patented JBA Firecone® merge collector
  • JBA sealing rings on head flange
  • Provisions for all factory emissions equipment
  • Premium quality hardware and gaskets included
  • Will not void factory warranty
  • Optional ceramic coating (thermal barrier)

 

:: Header Benefits ::
  • Increase hp & torque throughout RPM range
  • Improved throttle response
  • Reduced under hood temperature
  • Increased passing power
  • Increased low-end torque
  • Makes engine more sensitive to other modifications (intake, chip, supercharger, etc.)
  • Improved engine compartment appearance
  • Improved fuel economy*

* results may vary

Headers :: Toyota Tundra/Sequoia 4.7L V8

Application

Stainless

Steel

Silver

Ceramic

Titanium

Ceramic

07-09, 4.7L V8 Cat4ward® Shorty

2013S

2013SJS

2013SJT

05-06, 4.7L V8 Cat4ward® Shorty

2011S

2011SJS

2011SJT

00-04, 4.7L V8, Cat4ward® Shorty

2010S

2010SJS

2010SJT

Explanation of available header finishes

:: JBA Exhaust Systems ::


Click to Enlarge
2004 Toyota Tundra with p/n 40-9014 installed

Wouldn't it be awesome to increase the power of your Toyota truck while improving the appearance and sound? JBA takes care of all three with a tuned after-cat exhaust system. Available in show quality stainless steel, these systems install easily, make great power, sound tough and look awesome.

Truckin' magazine wrote, "the easiest exhaust system we have ever installed. The pieces fit perfectly and everything was done in a little more than 10 mins." - 10/03

These exhaust systems are matched to work in conjunction with JBA headers for maximum gains. Bolt on a great sounding JBA system for your Toyota and you will feel and hear the difference.

:: Exhaust Features ::
  • Aggressive sound without annoying interior resonance
  • Smooth flowing mandrel-bent tubing
  • Available in show finish stainless steel
  • High flow JBA muffler
  • Polished stainless steel chrome plated 3" rolled lip exhaust tip with JBA logo
  • Easy bolt-on installation
  • High quality hardware
  • O.E. style exhaust hangers
  • Will not void factory warranty
  • 50 state smog legal*

* For most applications

:: Toyota Truck Exhaust Systems ::

Application

Stainless

Steel

10-15 Tundra, Acc Cab / Double Cab, 4.7L V8, 2/4 WD, 3" Single, 3" JBA S/S tip

40-9005

07-11 Tundra, Acc Cab / Double Cab, 4.7L V8, 2/4 WD, 3" Dual, 3" JBA S/S tip

40-9004

07-09 Tundra, Acc Cab / Double Cab, 4.7L V8, 2/4 WD, 3" Single, 3" JBA S/S tip

40-9003

00-06 Tundra, Acc Cab / Double Cab, 4.7L V8, 2/4 WD, 3" side exit, 3" JBA S/S tip

40-9014

For more exhaust system applications


:: How does it sound? ::

2004 Toyota Tundra 4.7L
JBA Headers p/n 2010SJS and JBA Exhaust System p/n 40-9014

Idle and rev (MP3)
Accelerating (MP3)

:: Shop Online ::
For a listing of online distributors

:: Dealer locator ::
Find your nearest distributors