::TESTIMONIALS

Customer: Bobby Turner - Stockton, CA

Vehicle: 2006 Dodge Charger R/T 5.7L

Part: 1964S, 2965SYC, 40-1600

“I have the complete system on my charger, headers on back. Absolutuely love em...great system, great product..”

Customer: Mike Beeler - NASA - Factory Five Racing Series

Vehicle: Factory Five race car 5.0L

Part: 1620S-2JS

“the headers installed flawlessly, and as soon as I got the car on the race track, I noticed immediately more low end torque and better throttle response over the other brand headers I had before. Thank you very much JBA.”

Customer: Luke Robinson - Erwin, TN

Vehicle: 2004 Dodge Ram 1500 5.7 HEMI

Part: 1960S-3

“My truck runs like a champ thanks for such a great product.”

Customer: Joe Roberts

Vehicle: 2004 Ford F-150

Part: 40-2636

“Just wanted to let you know everything went GREAT. Pipes arrived on Monday & installed on Tuesday & crusin’ that evening. Really I'm very pleased with the looks & sounds fantastic.”

Customer: Tom C.

Vehicle: 2006 Dodge Magnum R/T 5.7L

Part: 1964SJS, 40-1600

“JBA all the way!!! My favorite aspect of the JBA was it's deep, muscular tone… I have yet to hear an exhaust for this car that sounds better…”

Customer: James L.

Vehicle: 2006 Mustang GT

Part: 6675S, 6675SHC, 40-2627

“The setup is great. It sounds good. runs good, and makes tons and tons of power especially in the middle of the RPM range. We did our drag testing last night and ran 8.28 in the 1/8, or 12.85 in the quarter mile. Our previous best was 13.09, so we picked up 2 and a half tenths!”

Customer: Chris Iharra

Vehicle: 2004 Ford F-150

Part: 40-2526

“I recently added one of JBA's exhaust systems to my 2004 Crew Cab F150. LOVE the new sound! Everything looks great and it went on in around 1.5 hours.”

Customer: Sunny H.

Vehicle: 1997 Ford F-150 4.6L

Part: 40-2518

“Installation went smoothly. It was a straight forward, no hassle, installation with easy to follow installation instructions full of helpful photos. I’d have to say it was my best exhaust experience ever. The hardest part of the whole thing was getting the stock parts off. The system sounds good, not too loud, just about right. Good enough to make me feel like I want to be on the gas everywhere I go, but not loud enough to piss off my neighborhood.”

Customer: Pontiac Enthusiast Magazine

Vehicle: 2004 Pontiac GTO 5.7L

Part: 1809SJS, 40-3110

“The installation and fit were great, but the proof performance would come on the dyno... The chassis dyno shows a gain of 30 hp and 34 lb-ft of torque. That's a significant gain in our book."

Customer: Street Trucks Magazine

Vehicle: 1999 Chevy Pick-Up 5.7L

Part: 1832S-2

“We bolted JBA's 5.7L headers on one of our projects and made 16 hp and 46 ft.lbs. of torque."

Customer: Sport Truck Magazine

Vehicle: 2001 Chevy Silverado 6.0L

Part: 1850S-1, 40-3030

“The end result was a deep throaty sound and added 21 hp and 30 ft.lbs. of torque."

Customer: Truckin' Magazine

Vehicle: 2001 Ford Ranger 4.0L

Part: 1674S, 40-2540

“The total JBA package was able to maximize both horsepower and torque throughout the powerband."

Customer: 4 Wheel & Off Road Magazine

Vehicle: 1990 Chevy Pick-Up 5.7L

Part: 1830S, 2809SY

“The JBA set-up trimmed almost a full second off the 0-60 time, a 7 percent gain."

Customer: Jonathan O.

Vehicle: 2006 Mustang GT

Part: 6675SJS, 6675SHC, 40-2627

“One of the best things I did to my Mustang was JBA long tube headers and exhaust. I don't think my neighbors enjoy the sound too much, but it's music to my ears."

Customer: Kyle W.

Vehicle: 2006 Ford F-150 5.4L

Part: 40-2526

“I was surprised to find how easy the cat back exhaust was to install; it actually took me more time to install the air intake system than the exhaust. You definitely get what you pay for with JBA products!"

Customer: Mike A.

Vehicle: 2007 Toyota FJ Cruiser 4.0L

Part: 40-9020

“The exhaust sounds great and the response is awesome. I was amazed with the throttle response."

Customer: Truckin' Magazine

Vehicle: 2004 Nissan Titan 5.6L

Part: 1400S, 40-1400

“Nearly 30 hp for under $1000 and four hours of install is an awesome investment; and besides the added power, the Titan now has a big and burly V-8 rumble to it."

Customer: Four Wheel Drive &Sport Utility Magazine

Vehicle: 2005 Toyota Tundra 4.7L

Part: 2011SJS, 40-9014

“We were pleased to show an improvement of 21.8 hp at 4983 RPM and an improved torque rating of 21 lb-ft at 3728 RPM. Keep in mind that this is at the wheels, not the crank."

Customer: Bruce P.

Vehicle: 1969 Mack 1, 428 SCJ, Drag-Pack

Part: 6655SJS, 6655SH, 40-2650

“You really exceeded my expectations! My Mach 1 just sounds sooooo good!!! I really can turn heads wherever and whenever I choose to."

Customer: Daniel Elson

Vehicle: 2006 Dodge Charger R/T 5.7L

Part: 1964SJS, 2965SYC, 40-1600

“Dear JBA, I have your entire exhaust from headers all the way to the tips installed on my Dodge Charger. I have to say this system was pretty easy to install. I had no issues installing it myself and got a lot more power. In fact it sounds totally wicked!! I love going out to my car and starting it up just to hear it. I also noticed if I keep my foot off the gas I get better gas mpg too. Thanks for helping me have the best sounding charger in my neighborhood.”

Customer: Mike Alba

Vehicle: 2007 Toyota FJ Cruiser 4.0L

Part: 40-9020

“The exhaust sounds great and the response is awesome. The exhaust coupled with the intake gives great results. The FJ definitely does not work hard to get to 85 mph. I was amazed with the throttle response. The headers will be next but i will be singing JBA's praises from just the exhaust. Thank You.”

Customer: Ray Woodford

Vehicle: 1988 Chevrolet Pick-up 383 stroker

Part: 2830Y

“I bought an exhaust mid pipe off you guys for my truck...it performs and sounds great....”

Customer: Paul Svinicki - Paul's High Performance

Vehicle: 2005 Mustang V6

Part: 1617SJT, 40-2631

“I wanted you to know that our “Lil 6” ’05 V6 Mustang has now gone in the 10’s… We were at the NMRA Nationals at Bradenton, Florida this past weekend and below is a copy of our time slip and Ronda also has this on video. This makes us the first ’05 V6 Mustang in the 10’s!!! Thanks for all your help and support with your headers and dual exhaust kit."

Customer: John Gallagher (Amherst, NH)

Vehicle: 1999 Dodge Dakota Sport 5.2L

Part: 2945Y

“I must compliment you on the quality I see in your part no. 2945Y Y-pipes for 97-99 Dakota / Durango.”

Customer: Chad E. Wright

Vehicle: 2005 Toyota Tacoma 4.0L TRD

Part: 2035S

“I bought a pair of your headers for my truck, and love them.”

Customer: Tim Chaney

Vehicle: 2004 Chevrolet Corvette Z06 5.7L

Part: 1817S5JT

“I recently purchased a set of JBA Headers (Model 1817S5JT) for my 2004 Z06 Corvette. They where installed by Muffler Masters in Kannapolis NC. I am very pleased with your product and the car sounds and performs great.”

 

Like us on FACEBOOK!
New 2017 Catalog

Free Headers!

New 2007 Product! Chevy Silverado & GMC Sierra
Jeep Wrangler 4.0L
Ford F-150 4.6L & 5.4L